1. Log In:

   Access the network via command prompt with the username and password set correctly.

2. Verify Network Configuration:

   • Topology: Check the network topology configuration, ensuring the correct subnet and IP address are used. Look for the topology configuration in the network settings.

3. Server Locations:

   • MAC Addresses: Verify that each server's MAC address matches the network's MAC addresses. Cross-reference with online sources to ensure accuracy.

4. Rule Configuration:

   • Rules Assignment: Ensure each server has the correct rule configuration. Check rule types (e.g., 'network-only', 'access-only') and adjust if necessary.

5. Network Access Testing:

   • Public Wi-Fi: Test network access to public Wi-Fi. Configure the network with the correct IP and password if necessary.

6. Rule Configuration Testing:

   • Rule Types: Verify each server's rule is correctly assigned to 'network-only' or 'access-only' type.

7. Error Checking:

   • Log and Logs: Review error messages or logs for common issues. Check forums or documentation for troubleshooting help.

8. Log Out and Reboot:

   After successful tests, log out and reboot the network to reset any issues.

9. Security Measures:

   Ensure authentication and authorization are in place to prevent unauthorized access.

By following these steps, you can systematically test the IVPvanish network and troubleshoot any issues. If you encounter problems, consult documentation or forums for further assistance.